Tag Archives: Land Rover Freelander gearbox repair

2013 Mercedes Sprinter Gearbox Repair

Freelander Gearbox Repair

A 2010 Land Rover Freeland was brought into the workshop and the automatic gearbox specialists at Stephens Engineering carried out a Freelander gearbox repair.

The 2010 Freelander was brought into the workshop with the complaint that there was a violent vibration when the Freelander was pulling from rest.  The Freelander was placed on the ramps within the workshop and then the Freelander was checked on the ramp and this revealed that the vibration was in both the transfer box and the Haldex unit on the rear differential. The Haldex differential unit calculates how much drive should be directed to the rear wheels.

After a thorough inspection on the ramp of the Freeland, we concluded that a failure of the Haldex unit had in turn resulted in the Freelander transfer box being damaged.  The Freelander transfer box was stripped down and on stripping down the Freelander transfer box, we found the damage caused to the transfer box to be beyond economical repair.  The damaged Freelander transfer box was replaced  and the Freelander’s Haldex unit was repaired. The Haldex unit sits between the propshaft and the rear differential , appling the torque to the differential when the vehicle is pulling away or when manoeuvring at speed speeds. As a result, in addition, the Freelander propshaft was checked for damage and wear and then refitted.

The fault codes were cleared and the long road test confirmed that the Freelander gearbox repair had been successful and all was well.

Land rover freelander gearbox repair

Land Rover Freelander Gearbox Repair

A 2011 Land Rover Freelander gearbox repair was carried out by the Ware automatic transmission specialists, Stephens Engineering.

The Land Rover Freelander was brought into the workshop by the owner, reporting that there was a lot of vibration from the land Rover Freelander. The owner of the Land Rover had already replaced the shafts and mounting, however, the vibration remained a problem for the Freelander.

A diagnostic road test was undertaken by the automatic transmission specialists at Stephens Engineering and the professional opinion was that the vibration problem of the Freeland was due to a fault within the Freelander automatic gearbox. The Land Rover gearbox was removed, dismantled and examined.  Whilst the Freelander torque converter was showing signs of wear, in our opinion, the wear to the torque converter was insufficient to cause a problem .  After further investigative inspection of the Land Rover transmission unit revealed two faults within the transmission unit, in the valve body and also a bushing.  The Land Rover Freelander gearbox repair was carried out, totally rebuilding the Freelander transmission as the vehicle  had covered eighty thousand miles.

At Stephens Engineering, we always carry out a long road test to ensure the fault has been successfully resolved and our road test with our customer confirmed that our automatic transmission diagnostics had been correct and the Freelander vibration problem had been resolved.

For specialist knowledge and expert service for Land Rover Freelander gearbox repair, your vehicle would choose Stephens Engineering.